Luca Bottura:Publications

Complete list of publications of Luca Bottura

Contributions to books and monographs
Refereed papers in international journals
Non-refereed papers in conference proceedings, notes and reports

Contributions to books and monographs

L. Rossi, L. Bottura, "Magnets for Particle Accelerators and Storage Rings", Chapter 4.3 in Applied Superconductivity Handbook on Devices and Applications, P. Seidel ed., Wiley, 2015, ISBN: 978-3-527-67065-9.
L. Bottura, C. Luongo, "Fluid Cooling", Chapter 3.5.1 in Applied Superconductivity Handbook on Devices and Applications, P. Seidel ed., Wiley, 2015, ISBN: 978-3-527-67065-9.
L. Bottura, D. Tommasini, "Magnets, Normal and Superconducting", Chapter 8.1 in Accelerators and Colliders, S. Myers and H. Schopper eds., Springer-Verlag, 2013, DOI: 10.1007/978-3-642-23053-0_25.
L. Bottura, A. Mc Inturff, "Magnet Engineering - Study in Stability and Quench Protection", Chapter 12.3 in 100 Years of Superconductivity, H. Rogalla, P.H. Kes eds., CRC Press, Taylor & Francis, 2012, ISBN: 13.978-1-4398-4984-4.
L. Bottura, C. Luongo, "Stability in Forced Flow Conductors", Wiley Encyclopedia for Electrical and Electronic Engineering, Vol. 21, 87-98, J. G. Webster ed., Wiley and Sons, Inc., 1999, DOI: 10.1002/047134608X.W1318.
L. Bottura, "Practical Stability Design", Chapter B-3.3 in Handbook of Applied Superconductivity, B. Seeber ed., 139-150, Institute of Physics Publishing, Bristol, 1998, ISBN: 13. 978-0750303774.
L. Bottura, "Cable-in-Conduit", Chapter B-3.4 in Handbook of Applied Superconductivity, B. Seeber ed., 151-171, Institute of Physics Publishing, Bristol, 1998, ISBN: 13. 978-0750303774.
L. Bottura, "Quench Propagation and Protection in Cable-in-Conduit Superconductors", Chapter C-4 in Handbook of Applied Superconductivity, B. Seeber ed., 557-572, Institute of Physics Publishing, Bristol, 1998, ISBN: 13. 978-0750303774.
L. Bottura,"The Quench Propagation in Superconducting Magnets. A Finite Element Solution", in: Finite Element in the 90's, E. Onate, et al. eds., 499-508, Springer Verlag, 1991, ISBN: 978-3-662-10326-5.
L. Bottura, "Appendice B: il programma CRIS per l'analisi del problema di interazione fluido-struttura con l'elemento triangolare a tre nodi", in F. Cesari, "Il metodo degli elementi finiti applicato al moto dei fluidi", Pitagora Editrice, Bologna, Italy, 1986, ISBN: 978-8-837-103606.

Refereed papers in international journals

2018

M. Breschi, A. Musso, A. Ballarino, L. Bottura, "Impact of the Resistive Core on Losses in Superconducting Rutherford Cables: Analysis with the Continuum Model", IEEE Trans. Appl. Sup., 28 (4), 8272375, 2018.
Q. Zhang, Y. Yang, E. Young, L. Cavalucci, A. Kario, W. Goldacker, A. Usoskin, L. Bottura, "Performance and Quench Characteristics of a Pancake Coil Wound with the 2G YBCO Roebel Cable", IEEE Trans. Appl. Sup., 28 (4), 8270649, 2018.
S. Izquierdo Bermudez, G. Willering, H. Bajas, M. Bajko, B. Bordini, L. Bottura, J.C. Perez, G. De Rijk, F. Savary, "Quench Protection of the 11 T Nb3Sn Dipole for the High Luminosity LHC", IEEE Trans. Appl. Sup., 28 (3), 8272459, 2018.
P. Bruzzone, L. Bottura, F. Cau, G. De Rijk, P. Ferracin, J. Minervini, A. Portone, S. Prestemon, E. Rochepault, E. Ravaioli, G. Sabbi, P. Testoni, "Conceptual Design of a Large Aperture Dipole for Testing of Cables and Insert Coils at High Field", IEEE Trans. Appl. Sup., 28 (3), 4005505, 2018.
G. Willering, C. Petrone, M. Bajko, H. Bajas, B. Bordini, L. Bottura, et al., "Cold Powering Tests and Protection Studies of the FRESCA2 100 mm Bore Nb3Sn Block-Coil Magnet", IEEE Trans. Appl. Sup., 28 (3), 4005105, 2018.
L. Rossi, A. Badel, H. Bajas, M. Bajko, A. Ballarino, C. Barth, U. Betz, L. Bottura, et al., "The EuCARD2 Future Magnets Program for Particle Accelerator High-Field Dipoles: Review of Results and Next Steps", IEEE Trans. Appl. Sup., 28 (3), 8239658, 2018.
R. Flukiger, T. Spina, F. Cerutti, M.I. Besana, C. Scheuerlein, A. Ballarino, L. Bottura, "Impact of the Number of dpa on the Superconducting Properties in HiLumi-LHC and FCC Accelerators", IEEE Trans. Appl. Sup., accepted for publication, 2018.
G. Willering, M. Bajko, H. Bajas, B. Bordini, L. Bottura, J. Feuvrier, L. Fiscarelli, S. Izquierdo Bermudez, C. Loeffler, F. Mangiarotti, E. Nilsson, J.C. Perez, G. De Rijk, F. Savary, "Comparison of Cold Powering Performance of 2-m long Nb3Sn 11T Model Magnets", IEEE Trans. Appl. Sup., accepted for publication, 2018.
F. Savary, B. Bordini, L. Fiscarelli, A. Foussat, L. Grand Clement, F. Lackner, C. Loeffler, M. Semeraro, D. Smekens, D.D. Ramos, H. Prin, R. Principe, L. Bottura, L. Rossi, S. Izquierdo Bermudez, "Design and construction of the full-length prototype of the 11T dipole magnet for the High Luminosity LHC Project at CERN", IEEE Trans. Appl. Sup., accepted for publication, 2018.
C. Petrone, J. Van Nugteren, H. Bajas, L. Bottura, G. Kirby, L. Rossi, S. Russenschuck, "Measurement and Analysis of the Dynamic Effects in an HTS Dipole Magnet", IEEE Trans. Appl. Sup., accepted for publication, 2018.
A. Usoskin, U. Betz, F. Hofacker, A. Rutt, K. Schlenga, B. Prause, L. Rossi, L. Bottura, A. Ballarino, C. Senatore, A. Kario, W. Goldacker, A. Meledin, D. Abraimov, D. Larbalestier, "Double-disordered HTS coated conductors and their assemblies aimed for ultra-high fields: large area tapes", IEEE Trans. Appl. Sup., accepted for publication, 2018.
E. Todesco, G. Willering, B. Auchmann, M. Bajko, L. Bottura, O. Bruning, G. De Rijk, P. Fessia, P. Hagen, D. Mapelli, S. Le Naour, M. Modena, J.C. Perez, L. Rossi, R. Schmidt, A. Siemko, J.Ph. Tock, D. Tommasini, A. Verweij, "Training of the main dipoles magnets in the Large Hadron Collider towards 7 TeV operation", IEEE Trans. Appl. Sup., accepted for publication, 2018.
D. Tommasini, D. Arbelaez, B. Auchmann, H. Bajas, M. Bajko, A. Ballarino, E. Barzi, G. Bellomo, M. Benedikt, S. Izquierdo Bermudez, B. Bordini, L. Bottura, et al., "Status of the 16 T dipole development program for a future hadron collider", IEEE Trans. Appl. Sup., accepted for publication, 2017.

2017

J.Ph. Tock, L.Bottura, et al., "A Statistical Analysis of Electrical Faults in the LHC Superconducting Magnets and Circuits", IEEE Trans. Appl. Sup., , , 2017.
C. Scheuerlein, M. Di Michiel, M. Hofmann, M. Lorentzon, F. Lackner, R. Flukiger, F. Savary, L. Bottura, "Residual strain in the Nb3Sn 11 T dipole magnet coils for HL-LHC", Superconductor Science and Technology, 30 (12), 125002, 2017.
S.I. Bermudez, L. Bottura, L. Fiscarelli, E. Todesco, "Decay and Snapback in Nb3Sn Dipole Magnets", IEEE Trans. Appl. Sup., 27 (4), 7762746, 2017.
M. Breschi, E. Felcini, L. Bottura, "Quench Level of the HL-LHC Nb3Sn IR Quadrupoles", IEEE Trans. Appl. Sup., 27 (4), 7782864, 2017.
T. Spina, A. Ballarino, L. Bottura, C. Scheuerlein, R. Flukiger, "Artificial Pinning in Nb3Sn Wires", IEEE Trans. Appl. Sup., 27 (4), 7815273, 2017.
J. Ekin, N. Cheggour, L. Goodrich, J. Splett, B. Bordini, D. Richter, L. Bottura, "Extrapolative scaling expression: A fitting equation for extrapolating full Ic (B,T,eps) data matrixes from limited data", IEEE Trans. Appl. Sup., 27 (4), 7805280, 2017.
G.P. Willering, M. Bajko, L. Bottura, Z. Charifoulline, M. Charrondiere, G. D 'Angelo, G. Dib, O. Ditsch, P. Hagen, S. Le Naour, H. Prin, F. Savary, E. Todesco, "Performance of CERN LHC Main Dipole Magnets on the Test Bench from 2008 to 2016", IEEE Trans. Appl. Sup., 27 (4), 7762046, 2017.
P.N. Degtyarenko, A. Ballarino, L. Bottura, S.Y. Gavrilkin, R. Flukiger, V.S. Kruglov, S.T. Latushkin, A.I. Ryazanov, C. Scheuerlein, E.V. Semenov, S.V. Shavkin, T. Spina, V.N. Unezhev, "Effect of irradiation with 32-MeV protons on critical parameters of modern Nb3Sn-based superconducting composite wires", Technical Physics Letters, 43 (6), 574-576, 2017.
E. Nilsson, S. Izquierdo Bermudez, A. Ballarino, B. Bordini, L. Bottura, J. Fleiter, F. Lackner, C. Loffler, J.C. Perez, H. Prin, G. De Rijk, D. Smekens, F. Savary, "Design optimization of the Nb3Sn 11 T dipole for the high luminosity LHC", IEEE Trans. Appl. Sup., 27 (4), 7765096, 2017.
G.P. Willering, M. Bajko, H. Bajas, B. Bordini, L. Bottura, J. Feuvrier, L. Fiscarelli, M. Guinchard, S. Izquierdo Bermudez, M. Karppinen, C. Loffler, J.C. Perez, G. De Rijk, F. Savary, D. Smekens, "Cold Powering Performance of the First 2 m Nb3Sn DS11T Twin-Aperture Model Magnet at CERN", IEEE Trans. Appl. Sup., 27 (4), 7762109, 2017.
E. Todesco, B. Auchmann, M. Bajko, L. Bottura, O. Bruning, G. De Rijk, P. Fessia, P. Hagen, S. Le Naour, M. Modena, J.C. Perez, L. Rossi, R. Schmidt, A. Siemko, J.Ph. Tock, D. Tommasini, A. Verweij, G. Willering, "Training Behavior of the Main Dipoles in the Large Hadron Collider", IEEE Trans. Appl. Sup., 27 (4), 7831387, 2017.
M. Bajko, V. Benda, L. Bottura, A.J. Broche, F. Formenti, S. Giannelli, C. Giloux, A. Kosmicki, C. Goncalves Perez, E. Perez-Duenas, V. Mertens, G. De Rijk, L. Rossi, N. Dos Santos, L. Serio, M. Strychalski, H. Thiesen, A.V. Craen, "Upgrade of the CERN Superconducting Magnet Test Facility", IEEE Trans. Appl. Sup., 27 (4), 7765028, 2017.
F. Savary, M. Bajko, B. Bordini, L. Bottura, et al., "Progress on the Development of the Nb3Sn 11T Dipole for the High Luminosity Upgrade of LHC", IEEE Trans. Appl. Sup., 27 (4), 7847375, 2017.
G.A. Kirby, J. Van Nugteren, H. Bajas, V. Benda, A. Ballarino, M. Bajko, L. Bottura, et al., "First Cold Powering Test of REBCO Roebel Wound Coil for the EuCARD2 Future Magnet Development Project", IEEE Trans. Appl. Sup., 27 (4), 7835198, 2017.
D. Tommasini, B. Auchmann, H. Bajas, M. Bajko, A. Ballarino, G. Bellomo, M. Benedikt, S. Izquierdo Bermudez, B. Bordini, L. Bottura, et al., "The 16 T Dipole Development Program for FCC", IEEE Trans. Appl. Sup., 27 (4), 7763798, 2017.
A.L. Vasiliev, A. Ballarino, L. Bottura, S.Y. Gavrilkin, P.N. Degtyarenko, I.A. Karateev, V.S. Kruglov, S.T. Latushkin, A.V. Lunev, A.I. Ryazanov, E.V. Semenov, V.N. Unezhev, R. Flukiger, S.V. Shavkin, "On the possible separation of the phase enriched with Nb in superconducting intermetallic Nb3Sn irradiated with fast protons", Bulletin of the Lebedev Physics Institute, 44 (4), 118-121, 2017.
R. Flukiger, T. Spina, F. Cerutti, A. Ballarino, C. Scheuerlein, L. Bottura, Y. Zubavichus, A. Ryazanov, R.D. Svetogovov, S. Shavkin, P. Degtyarenko, Y. Semenov, C. Senatore, R. Cerny, "Variation of Tc, lattice parameter and atomic ordering in Nb3Sn platelets irradiated with 12 MeV protons: Correlation with the number of induced Frenkel defects", Superconductor Science and Technology, 30 (5), 54003, 2017.

2016

P.N. Degtyarenko, A. Ballarino, L. Bottura, S.Y. Gavrilkin, R. Flukiger, I.A. Karateev, V.S. Kruglov, S.T. Latushkin, C. Scheuerlein, A.I. Ryazanov, E.V. Semenov, S.V. Shavkin, T. Spina, V.N. Unezhev, A.L. Vasiliev, "Influence of fast proton irradiation with energies of 12.4 and 12.8 MeV on magnetic characteristics and microstructure changes of superconducting intermetallic compound Nb3Sn", Journal of Physics: Conference Series, 747 (1), 12030, 2016.
C. Segal, C. Tarantini, Z.H. Sung, P.J. Lee, B. Sailer, M. Thoener, K. Schlenga, A. Ballarino, L. Bottura, B. Bordini, C. Scheuerlein, D.C. Larbalestier, "Evaluation of critical current density and residual resistance ratio limits in powder in tube Nb3Sn conductors", Superconductor Science and Technology, 29 (8), 85003, 2016.
A. Grether, C. Scheuerlein, A. Ballarino, L. Bottura, "Electromechanical behaviour of REBCO tape lap splices under transverse compressive loading", Superconductor Science and Technology, 29 (7), 74004, 2016.
S. Izquierdo Bermudez, L. Bottura, E. Todesco, "Persistent-Current Magnetization Effects in High-Field Superconducting Accelerator Magnets", IEEE Trans. Appl. Sup., 26 (4), 7384479, 2016.
A. Chiuchiolo, H. Bajas, M. Bajko, L. Bottura, M. Consales, A. Cusano, M. Giordano, J.C. Perez, "Advances in Fiber Optic Sensors Technology Development for Temperature and Strain Measurements in Superconducting Magnets and Devices", IEEE Trans. Appl. Sup., 26 (4), 7400953, 2016.
J. Van Nugteren, D. Schoerling, G. Kirby, J. Murtomaki, G. De Rijk, L. Rossi, L. Bottura, H. Ten Kate, M. Dhalle, "Layout Study for the Dipole Magnets of the Future Circular Collider Using Nb-Ti and Nb3Sn", IEEE Trans. Appl. Sup., 26 (4), 7406706, 2016.
E. Todesco, L. Bottura, M. Giovannozzi, P. Hagen, M. Juchno, M. Lamont, E. Maclean, R.T. Garcia, M. Schaumann, F. Schmidt, M.S. Camillocci, J. Wenninger, "The magnetic model of the LHC at 6.5 TeV", IEEE Trans. Appl. Sup., 26 (4), 7445861, 2016.
J.C. Perez, H. Bajas, M. Bajko, L. Bottura, B. Bordini, A. Chiuchiolo, G. De Rijk, P. Ferracin, J. Feuvrier, P. Grosclaude, M. Juchno, E. Rochepault, J. Rysti, X. Sarasola, "16 T Nb3Sn Racetrack Model Coil Test Result", IEEE Trans. Appl. Sup., 26 (4), 7407596, 2016.
G. Willering, M. Bajko, B. Bordini, L. Bottura, L. Fiscarelli, S. Izquierdo Bermudez, M. Karppinen, C. Loffler, J.C. Perez, G. De Rijk, F. Savary, "Cold Powering Tests of 11-T Nb3Sn Dipole Models for LHC Upgrades at CERN", IEEE Trans. Appl. Sup., 26 (4), 7470238, 2016.
A. Verweij, B. Auchmann, M. Bednarek, L. Bottura, Z. Charifoulline, S. Feher, P. Hagen, M. Modena, S. Le Naour, I. Romera, A. Siemko, J. Steckert, J.P. Tock, E. Todesco, G. Willering, D. Wollmann, "Retraining of the 1232 Main Dipole Magnets in the LHC", IEEE Trans. Appl. Sup., 26 (4), 7372416, 2016.
S. Izquierdo Bermudez, B. Auchmann, H. Bajas, M. Bajko, B. Bordini, L. Bottura, G. Chlachidze, M. Karppinen, J. Rysti, F. Savary, G. Willering, A.V. Zlobin, "Quench Protection Studies of the 11-T Nb3Sn Dipole for the LHC Upgrade", IEEE Trans. Appl. Sup., 26 (4), 7422690, 2016.
F. Savary, E. Barzi, B. Bordini, L. Bottura, G. Chlachidze, D. Ramos, S. Izquierdo Bermudez, M. Karppinen, F. Lackner, C.H. Loffler, R. Moron-Ballester, A. Nobrega, J.C. Perez, H. Prin, D. Smekens, G. De Rijk, S. Redaelli, L. Rossi, G. Willering, A.V. Zlobin, M. Giovannozzi, "The 11 T Dipole for HL-LHC: Status and Plan", IEEE Trans. Appl. Sup., 26 (4), 7442806, 2016.
L. Bottura, "Thermal, Hydraulic, and Electromagnetic Modeling of Superconducting Magnet Systems", IEEE Trans. Appl. Sup., 26 (3), 7437426, 2016.
L. Bottura, S.A. Gourlay, A. Yamamoto, A.V. Zlobin, "Superconducting Magnets for Particle Accelerators", IEEE Transactions on Nuclear Science, 63 (2), 7323879, 2016.
T. Spina, C. Scheuerlein, D. Richter, A. Ballarino, F. Cerutti, L.S. Esposito, A. Lechner, L. Bottura, R. Flukiger, "Correlation between the Number of Displacements per Atom and Tc after High-Energy Irradiations of Nb3Sn Wires for the HL-LHC", IEEE Trans. Appl. Sup., 26 (3), 7445846, 2016.
C. Scheuerlein, R. Bjoerstad, A. Grether, M.O. Rikel, J. Hudspeth, M. Sugano, A. Ballarino, L. Bottura, "Comparison of Electromechanical Properties and Lattice Distortions of Different Cuprate High-Temperature Superconductors", IEEE Trans. Appl. Sup., 26 (3), 7433977, 2016.
J. Van Nugteren, B. Van Nugteren, P. Gao, L. Bottura, M. Dhalle, W. Goldacker, A. Kario, H. Ten Kate, G. Kirby, E. Krooshoop, G. De Rijk, L. Rossi, C. Senatore, S. Wessel, K. Yagotintsev, Y. Yang, "Measurement and Numerical Evaluation of AC Losses in a ReBCO Roebel Cable at 4.5 K", IEEE Trans. Appl. Sup., 26 (3), 7399391, 2016.
Y. Yang, J. Pelegrin, I. Falorio, E.A. Young, A. Kario, W. Goldacker, M.M.J. Dhalle, J. Van Nugteren, G. Kirby, L. Bottura, A. Ballarino, "Magnetization Losses of Roebel Cable Samples with 2G YBCO Coated Conductor Strands", IEEE Trans. Appl. Sup., 26 (3), 7403925, 2016.
A. Badel, A. Ballarino, C. Barth, L. Bottura, M.M.J. Dhalle, J. Fleiter, W. Goldacker, J. Himbele, A. Kario, L. Rossi, A. Rutt, C. Scheuerlein, C. Senatore, P. Tixador, A. Usoskin, Y. Yang, "Advances in the Development of a 10-kA Class REBCO Cable for the EuCARD2 Demonstrator Magnet", IEEE Trans. Appl. Sup., 26 (3), 7445190, 2016.
C. Scheuerlein, J. Andrieux, M.O. Rikel, J. Kadar, C. Doerrer, M. Di Michiel, A. Ballarino, L. Bottura, J. Jiang, F. Kametani, E.E. Hellstrom, D.C. Larbalestier, "Influence of the Oxygen Partial Pressure on the Phase Evolution during Bi-2212 Wire Melt Processing", IEEE Trans. Appl. Sup., 26 (3), 7416201, 2016.
G. Kirby, L. Rossi, A. Badel, M. Bajko, A. Ballarino, L. Bottura, M. Dhalle, M. Durante, P. Fazilleau, J. Fleiter, W. Goldacker, E. Haro, J. Himbele, A. Kario, S. Langeslag, C. Lorin, J. Murtzomaki, J. Van Nugteren, G. De Rijk, T. Salmi, C. Senatore, A. Stenvall, P. Tixador, A. Usoskin, G. Volpini, Y. Yang, N. Zangenberg, "Status of the Demonstrator Magnets for the EuCARD-2 Future Magnets Project", IEEE Trans. Appl. Sup., 26 (3), 7404281, 2016.
E. Seiler, D. Richter, B. Bordini, L. Bottura, D. Bessette, A. Vostner, A. Devred, "Hysteresis Losses and Effective Jc(B) Scaling Law for ITER Nb3Sn Strands", IEEE Trans. Appl. Sup., 26 (2), 7378911, 2016.
R. Tomas, M. Benedikt, A.V. Bogomyagkov, L. Bottura, F. Cerutti, L.S. Esposito, A. Ferrari, B. Haerer, B. Holzer, E. Jensen, M. Koratzinos, R. Martin, L. Medina, D. Schulte, E. Todesco, J. Wenninger, S. White, F. Zimmermann, "FCC study: Parameters and optics for hadron and lepton colliders", Nuclear and Particle Physics Proceedings, 273-275, 149-155, 2016.

2015

G.P. Willering, C. Giloux, M. Bajko, M. Bednarek, L. Bottura, Z. Charifoulline, K. Dahlerup-Petersen, G. Dib, G. D'Angelo, A. Gharib, L. Grand-Clement, S. Izquierdo Bermudez, H. Prin, V. Roger, S. Rowan, F. Savary, J.-Ph. Tock, A. Verweij, "Performance of the cold powered diodes and diode leads in the main magnets of the LHC", IOP Conference Series: Materials Science and Engineering, 101 (1), 12076, 2015.
D. Abraimov, A. Ballarino, C. Barth, L. Bottura, R. Dietrich, A. Francis, J. Jaroszynski, G.S. Majkic, J. McCallister, A. Polyanskii, L. Rossi, A. Rutt, M. Santos, K. Schlenga, V. Selvamanickam, C. Senatore, A. Usoskin, Y.L. Viouchkov, "Double disordered YBCO coated conductors of industrial scale: High currents in high magnetic field", Superconductor Science and Technology, 28 (11), 114007, 2015.
C. Tarantini, C. Segal, Z.H. Sung, P.J. Lee, L. Oberli, A. Ballarino, L. Bottura, D.C. Larbalestier, "Composition and connectivity variability of the A15 phase in PIT Nb3Sn wires", Superconductor Science and Technology, 28 (9), 95001, 2015.
A. Ballarino, L. Bottura, "Targets for R&D on Nb3Sn conductor for high energy physics", IEEE Trans. Appl. Sup., 25 (3), 7017491, 2015.
G. Montenero, P. Arpaia, A. Ballarino, L. Bottura, "Design, assembly, and commissioning of a cryogenic DC current transformer designed for measuring currents of up to 80 kA", IEEE Trans. Appl. Sup., 25 (3), 6955787, 2015.
M. Breschi, A. Bevilacqua, L. Bottura, P.P. Granieri, "Analysis of beam-induced quenches of the LHC cables with a multi-strand model", IEEE Trans. Appl. Sup., 25 (3), 4700405, 2015.
J. Fleiter, A. Ballarino, L. Bottura, W. Goldacker, A. Kario, "Characterization of roebel cables for potential use in high-field magnets", IEEE Trans. Appl. Sup., 25 (3), 6945872, 2015.
S. Heck, C. Scheuerlein, J. Fleiter, A. Ballarino, L. Bottura, "The electrical resistance of rutherford-type superconducting cable splices", IEEE Trans. Appl. Sup., 25 (3), 6910273, 2015.
J. Fleiter, B. Bordini, A. Ballarino, L. Oberli, S. Izquierdo, L. Bottura, "Quench Propagation in Nb3Sn Rutherford Cables for the Hi-Lumi Quadrupole Magnets", IEEE Trans. Appl. Sup., 25 (3), 6949099, 2015.
T. Baumgartner, M. Eisterer, H.W. Weber, R. Flukiger, C. Scheuerlein, L. Bottura, "Performance boost in industrial multifilamentary Nb3Sn wires due to radiation induced pinning centers", Scientific Reports, 5, 10236, 2015.
T. Spina, C. Scheuerlein, D. Richter, B. Bordini, L. Bottura, A. Ballarino, R. Flukiger, "Variation of the critical properties of alloyed Nb-Sn wires after proton irradiation at 65 MeV and 24 GeV", IEEE Trans. Appl. Sup., 25 (3), 6994214, 2015.
G.L. Sabbi, L. Bottura, D.W. Cheng, D.R. Dietderich, P. Ferracin, A. Godeke, S.A. Gourlay, M. Marchevsky, E. Todesco, X. Wang, "Performance characteristics of Nb3Sn block-coil dipoles for a 100 TeV hadron collider", IEEE Trans. Appl. Sup., 25 (3), 6937127, 2015.
Y. Yang, J. Pelegrin, E.A. Young, I. Falorio, A. Ballarino, L. Bottura, H. Miao, Y. Huang, "Coupling Current and Hysteresis Losses of Bi2212 Round Wires with Twisted Filaments", IEEE Trans. Appl. Sup., 25 (3), 6966794, 2015.
R. Bjoerstad, C. Scheuerlein, M.O. Rikel, A. Ballarino, L. Bottura, J. Jiang, M. Matras, M. Sugano, J. Hudspeth, M. Di Michiel, "Strain induced irreversible critical current degradation in highly dense Bi-2212 round wire", Superconductor Science and Technology, 28 (6), 62002, 2015.
P. Alknes, B. Bordini, B. Bartova, G.A. Izquierdo, M. Cantoni, A. Devred, A. Vostner, A. Ballarino, L. Bottura, "Degradation of the Cu Residual Resistivity Ratio in Cr-Plated Composite Nb3Sn Wires", IEEE Trans. Appl. Sup., 25 (3), 7038153, 2015.
H. Bajas, M. Bajko, B. Bordini, L. Bottura, S.I. Bermudez, J. Feuvrier, A. Chiuchiolo, J.C. Perez, G. Willering, "Quench Analysis of High-Current-Density Nb3Sn Conductors in Racetrack Coil Configuration", IEEE Trans. Appl. Sup., 25 (3), 7005379, 2015.
C. Lorin, M. Segreti, A. Ballarino, L. Bottura, M. Durante, P. Fazilleau, J. Fleiter, G. Kirby, J. Van Nugteren, C. Pes, J.-M. Rifflet, L. Rossi, "Cos-theta Design of Dipole Inserts Made of REBCO-Roebel or BSCCO-Rutherford Cables", IEEE Trans. Appl. Sup., 25 (3), 6915851, 2015.
H. Bajas, G. Ambrosio, M. Anerella, M. Bajko, R. Bossert, L. Bottura, S. Caspi, D. Cheng, A. Chiuchiolo, G. Chlachidze, D. Dietderich, H. Felice, P. Ferracin, J. Feuvrier, A. Ghosh, C. Giloux, A. Godeke, A.R. Hafalia, M. Marchevsky, E. Ravaioli, G.L. Sabbi, T. Salmi, J. Schmalzle, E. Todesco, P. Wanderer, X. Wang, M. Yu, "Test results of the LARP HQ02b magnet at 1.9 K", IEEE Trans. Appl. Sup., 25 (3), 6987272, 2015.
L. Rossi, A. Badel, M. Bajko, A. Ballarino, L. Bottura, M.M.J. Dhalle, M. Durante, P. Fazilleau, J. Fleiter, W. Goldacker, E. Haro, A. Kario, G. Kirby, C. Lorin, J. Van Nugteren, G. De Rijk, T. Salmi, C. Senatore, A. Stenvall, P. Tixador, A. Usoskin, G. Volpini, Y. Yang, N. Zangenberg, "The EuCARD-2 future magnets European collaboration for accelerator-quality HTS magnets", IEEE Trans. Appl. Sup., 25 (3), 6933889, 2015.
G.A. Kirby, J. Van Nugteren, A. Ballarino, L. Bottura, N. Chouika, S. Clement, V. Datskov, L. Fajardo, J. Fleiter, R. Gauthier, L. Gentini, L. Lambert, M. Lopes, J.C. Perez, G. De Rijk, A. Rijllart, L. Rossi, H. Ten Kate, M. Durante, P. Fazilleau, C. Lorin, E. Haro, A. Stenvall, S. Caspi, M. Marchevsky, W. Goldacker, A. Kario, "Accelerator-quality HTS dipole magnet demonstrator designs for the EuCARD-2 5-T 40-mm clear aperture magnet", IEEE Trans. Appl. Sup., 25 (3), 6918457, 2015.
C. Calzolaio, G. Mondonico, A. Ballarino, B. Bordini, L. Bottura, L. Oberli, C. Senatore, "Electro-mechanical properties of PIT Nb3Sn wires under transverse stress: experimental results and FEM analysis", Superconductor Science and Technology, 28 (5), 55014, 2015.
S. Heck, M. Solfaroli, O. Andreassen, P. Thonet, C. Scheuerlein, A. Ballarino, F. Bertinelli, L. Bottura, P. Fessia, J.-P. Tock, "Nondestructive testing and quality control of the LHC main interconnection splices", IEEE Trans. Appl. Sup., 25 (2), 6928412, 2015.
S.I. Bermudez, H. Bajas, L. Bottura, "Quench modeling in high-field Nb3Sn accelerator magnets", Physics Procedia, 67, 840-846, 2015.
H. Bajas, M. Bajko, V. Benda, L. Bottura, G. Bourgeois, M. Charrondiere, A. Chiuchiolo, P. Ferracin, M. Guinchard, J.E.M. Garcia, C. Giloux, M. Juchno, J.C. Perez, G. De Rijk, P. Viret, D.T. Ziemianski, "Test set-up for the cooling of heavy magnets by controlled way down to 77 K", Physics Procedia, 67, 331-337, 2015.
D. Schoerling, H. Bajas, M. Bajko, A. Ballarino, M. Benedikt, S.I. Bermudez, B. Bordini, L. Bottura, M. Buzio, G. De Rijk, M. Karppinen, F. Lackner, A. Milanese, J. Van Nugteren, V. Parma, J.C. Perez, S. Russenschuck, F. Savary, E. Todesco, D. Tommasini, "Strategy for superconducting magnet development for a future hadron-hadron circular collider at CERN", Proceedings of Science, 22-29-July-2015, 517, 2015.

2014

E. Todesco, L. Bottura, G. De Rijk, L. Rossi, "Dipoles for High-Energy LHC", IEEE Trans. Appl. Sup., 24 (3), 4004306, 2014.
B. Bordini, P. Alknes, A. Ballarino, L. Bottura, L. Oberli, "Critical Current Measurements of High-Jc Nb3Sn Rutherford Cables under Transverse Compression", IEEE Trans. Appl. Sup., 24 (3), 9501005, 2014.
G. Willering, M. Bajko, F. Borgnolutti, L. Bottura, V. Datskov, G. Deferne, J. Feuvrier, L. Fiscarelli, C. Giloux, M. Guinchard, V. Roger, "Fast Cycled Magnet Demonstrator Program at CERN: Instrumentation and Measurement Campaign", IEEE Trans. Appl. Sup., 24 (3), 4004405, 2014.
H. Mueller, F. Alessandria, G. Bellomo, L. Bottura, P. Fabbricatore, S. Farinon, E. Fischer, U. Gambardella, R. Musenich, M. Sorbi, G. Volpini, "Next Generation of Fast-Cycled Dipoles for SIS300 Synchrotron", IEEE Trans. Appl. Sup., 24 (3), 4004204, 2014.
P. Arpaia, A. Ballarino, L. Bottura, G. Montenero, "A cryogenic sensing element for measurement current transformers", Journal of Instrumentation, 9 (3), P03011, 2014.
T. Spina, C. Scheuerlein, D. Richter, L. Bottura, A. Ballarino, R. Flukiger, "Critical current density of Nb3Sn wires after irradiation with 65MeV and 24GeV protons", Journal of Physics: Conference Series, 507 (PART 2), 22035, 2014.
T. Baumgartner, M. Eisterer, H.W. Weber, R. Flukiger, C. Scheuerlein, L. Bottura, "Effects of neutron irradiation on pinning force scaling in state-of-the-art Nb3Sn wires", Superconductor Science and Technology, 27 (1), 15005, 2014.
C. Scheuerlein, M. Di Michiel, F. Buta, B. Seeber, C. Senatore, R. Flukiger, T. Siegrist, T. Besara, J. Kadar, B. Bordini, A. Ballarino, L. Bottura, "Stress distribution and lattice distortions in Nb3Sn multifilament wires under uniaxial tensile loading at 4.2 K", Superconductor Science and Technology, 27 (4), 44021, 2014.

2013

C. Marinucci, L. Bottura, M. Calvi, "Integrated analysis of quench propagation in a system of magnetically coupled superconducting coils", Cryogenics, 53(1), 94-106, 2013.
P.P. Granieri, M. Breschi, M. Casali, L. Bottura, A. Siemko, "Thermo-electric analysis of the interconnection of the LHC main superconducting bus bars", Cryogenics, 53(1), 107-118, 2013.
B. Bordini, D. Richter, P. Alknes, A. Ballarino, L. Bottura, L. Oberli, "Magnetization measurements of high-Jc Nb3Sn strands", IEEE Trans. Appl. Sup., 23(3), 6413176, 2013.
R. Flukiger, T. Baumgartner, M. Eisterer, H.W. Weber, T. Spina, C. Scheuerlein, C. Senatore, A. Ballarino, L. Bottura, "Variation of (Jc/Jc0)max of binary and ternary alloyed RRP and PIT Nb3Sn wires exposed to fast neutron irradiation at ambient reactor temperature", IEEE Trans. Appl. Sup., 23(3), 6403521, 2013.
T. Otto, C. Scheuerlein, R. Catherall, M. Glaser, O. Militaru, R. Flukiger, A. Ballarino, L. Bottura, "Radioactivity of Nb3Sn/Cu wires after proton irradiation", IEEE Trans. Appl. Sup., 23(3), 6384700, 2013.
V. Datskov, G. Kirby, L. Bottura, J.C. Perez, F. Borgnolutti, B. Jenninger, P. Ryan, "Precise thermometry for next generation LHC superconducting magnet prototypes", IEEE Trans. Appl. Sup., 24 (3), 6656885, 2013.
I. Pong, L.-R. Oberli, L. Bottura, "Cu diffusion in Nb3Sn internal tin superconductors during heat treatment", Superconductor Science and Technology, 26 (10), 105002, 2013.
B. Bordini, P. Alknes, L. Bottura, L. Rossi, D. Valentinis, "An exponential scaling law for the strain dependence of the Nb 3Sn critical current density", Superconductor Science and Technology, 26 (7), 75014, 2013.
J. Fleiter, A. Ballarino, L. Bottura, P. Tixador, "Electrical characterization of REBCO Roebel cables", Superconductor Science and Technology, 26 (6), 65014, 2013.
P.J. Mallon, B. Bordini, L. Chiesa, C. Scheuerlein, A. Ballarino, L. Bottura, L.-R. Oberli, "Mechanical material characterization and finite element modeling of unreacted Nb3Sn PIT wires under transverse pressure", IEEE Trans. Appl. Sup., 23 (3), 6384692, 2013.

2012

L. Bottura, and A. Godeke, "Superconducting Materials and Conductors: Fabrication and Limiting Parameters", Rev. Accl. Sci. Tech. 05, 25-50, 2012. DOI: 10.1142/S1793626812300022.
L. Rossi, and L. Bottura, "Superconducting Magnets for Particle Accelerators", Rev. Accl. Sci. Tech. 05, 51-90, 2012. DOI: 10.1142/S1793626812300034.
E. Takala, K.F. Klein, B. Bordini, L. Bottura, J. Bremer, L. Rossi, "Silica-silica polyimide buffered optical fibre irradiation and strength experiment at cryogenic temperatures for 355 nm pulsed lasers" Cryogenics, 52(1), 77-81, 2012.
P. Arpaia, L. Bottura, L. Fiscarelli, L. Walckiers, "Performance of a fast digital integrator in on-field magnetic measurements for particle accelerators" Review of Scientific Instruments, 83(2), 24702, 2012.
I. Pong, A. Vostner, B. Bordini, M. Jewell, F. Long, Y. Wu, L. Bottura, A. Devred, D. Bessette, N. Mitchell, "Current sharing temperature of NbTi SULTAN samples compared to prediction using a single pinning mechanism parametrization for NbTi strand", Superconductor Science and Technology, 25(5),54011, 2012.
P. Arpaia, L. Bottura, G. Montenero, S. Le Naour, "Performance improvement of a measurement station for superconducting cable test", Review of Scientific Instruments, 83(9), 95111, 2012.
G. Mondonico, B. Seeber, A. Ferreira, B. Bordini, L.-R. Oberli, L. Bottura, A. Ballarino, R. Fluekiger, C. Senatore, "Effect of quasi-hydrostatical radial pressure on Ic of Nb3Sn wires", Superconductor Science and Technology, 25(11),115002, 2012.
C. Darve, L. Bottura, N.A. Patankar, S.W. Van Sciver, "A method for numerical simulation of superfluid helium", AIP Conference Proceedings, 1434(57), 247-254, 2012.
B. Bordini, L. Bottura, G. Mondonico, L. Oberli, D. Richter, B. Seeber, C. Senatore, E. Takala, D. Valentinis, "Extensive characterization of the 1 mm PIT Nb 3Sn strand for the 13-T FRESCA2 magnet", IEEE Trans. Appl. Sup., 22(3), 6000304, 2012.
W.M. De Rapper, B. Bordini, S. Le Naour, L. Bottura, H.H.J. Ten Kate, "Critical current in high-Jc Nb3Sn rutherford cables affected substantially by the direction of the applied magnetic field", IEEE Trans. Appl. Sup., 22(3), 6109331, 2012.
B. Bordini, L. Bottura, L. Oberli, L. Rossi, E. Takala, "Impact of the residual resistivity ratio on the stability of Nb 3Sn magnets", IEEE Trans. Appl. Sup., 22(3), 6109328, 2012.
C. Senatore, G. Mondonico, F. Buta, B. Seeber, R. Flukiger, B. Bordini, P. Alknes, L. Bottura, "Phase formation, composition and T c distribution of binary and Ta-alloyed Nb3Sn wires produced by various techniques", IEEE Trans. Appl. Sup., 22(3), 6099588, 2012.
E. Takala, B. Bordini, J. Bremer, C. Balle, L. Bottura, L. Rossi, "An experimental setup to measure the minimum trigger energy for magnetothermal instability in Nb3Sn Strands", IEEE Trans. Appl. Sup., 22(3), 6000704, 2012.
F. Borgnolutti, B. Auchmann, L. Bottura, F. Carra, G. Foffano, J.M. Gomes De Faria, O. Kalouguine, G. Kirby, C. Lopez, D. Tommasini, "Construction of the CERN fast cycled superconducting dipole magnet prototype", IEEE Trans. Appl. Sup., 22(3), 4001604, 2012.
L. Bottura, G. De Rijk, L. Rossi, E. Todesco, "Advanced accelerator magnets for upgrading the LHC", IEEE Trans. Appl. Sup., 22(3), 6172724, 2012.
P.P. Granieri, M. Casali, M. Bianchi, M. Breschi, L. Bottura, G. Willering, "Analysis of defective interconnections of the 13 kA LHC superconducting bus bars", IEEE Trans. Appl. Sup., 22(3), 4000504, 2012.
T. Baumgartner, M. Eisterer, H.W. Weber, R. Flukiger, B. Bordini, L. Bottura, C. Scheuerlein, "Evaluation of the critical current density of multifilamentary Nb 3Sn wires from magnetization measurements", IEEE Trans. Appl. Sup., 22(3), 6000604, 2012.

2011

C. Marinucci, L. Bottura, M. Calvi, R. Wesche, "Quench analysis of a high-current forced-flow HTS conductor model for fusion magnets", IEEE Trans. Appl. Sup., 21(3), 2445-2448, 5641602, 2011.
L. Bottura, A. Bonasia, F. Borgnolutti, W. Gaertner, S. Le Naour, L. Oberli, G. Peiro, D. Richter, T. Salmi, G. Sikler, G. Willering, "Strand and cable R&D for fast cycled magnets at CERN", IEEE Trans. Appl. Sup., 21(3), 2354-2358, 5712148, 2011.
C. Scheuerlein, M. Di Michiel, G. Arnau, R. Flukiger, F. Buta, I. Pong, L. Oberli, L. Bottura, "Coarse Nb3Sn grain formation and phase evolution during the reaction of a high Sn content internal tin strand", IEEE Trans. Appl. Sup., 21(3), 2554-2558, 5613214, 2011.
G.P. Willering, L. Bottura, P. Fessia, C. Scheuerlein, A.P. Verweij, "Thermal runaways in LHC interconnections: Experiments", IEEE Trans. Appl. Sup., 21(3), 1781-1785, 5675749, 2011.
F. Bertinelli, L. Bottura, J.-M. Dalin, P. Fessia,R.H. Flora, S. Heck, H. Pfeffer, H. Prin, C. Scheuerlein, P. Thonet, J.-P. Tock, L. Williams, "Production and quality assurance of main busbar interconnection splices during the LHC 2008-2009 shutdown", IEEE Trans. Appl. Sup., 21(3), 1786-1790, 5624607, 2011.
H. Felice, M. Bajko, B. Bingham, B. Bordini, L. Bottura, S. Caspi, G. De Rijk, D. Dietderich, P. Ferracin, C. Giloux, A. Godeke, R. Hafalia, A. Milanese, L. Rossi, G.L. Sabbi, "Performance of a Nb3Sn quadrupole under high stress", IEEE Trans. Appl. Sup., 21(3), 1849-1853, 5641592, 2011.
B. Bordini, D. Bessette, L. Bottura, A. Devred, M. Jewell, D. Richter, C. Senatore, "Magnetization and inter-filament contact in HEP and ITER bronze-route Nb3Sn wires", IEEE Trans. Appl. Sup., 21(3), 3373-3376, 5672791, 2011.
I. Pong, L.-R. Oberli, L. Bottura, C. Scheuerlein, "Longitudinal and transverse cross-sectional microstructure and critical current density in Nb 3Sn superconductors", IEEE Trans. Appl. Sup., 21(3), 2537-2540, 5714730, 2011.

2010

C. Marinucci, L. Bottura, M. Calvi, "A Parametric Model of the ITER Coils for Control Optimization", Cryogenics, 50(3), 187-199, 2010.
I. Pong, C. Scheuerlein, C. Senatore, L. Thilly, M.D. Michiel, A. Gerardin, S.C. Hopkins,L.-R. Oberli, G. Geandier, B.A. Glowacki, L. Bottura, "Cu-Ti formation in Nb-Ti/Cu superconducting strand monitored by in situ techniques" Defect and Diffusion Forum, 297/301, 695-701, 2010
M. Bagnasco, L. Bottura, M. Lewandowska, "Friction factor correlation for CICC's based on a porous media analogy" Cryogenics, 50(3), 711-719, 2010.
C. Scheuerlein, I. Pong, C. Senatore, M. Di Michiel, L. Thilly, A. Gerardin, B. Rehmer, L. Oberli, G. Willering, L. Bottura, "Temperature induced degradation of Nb-Ti/Cu composite superconductors", Journal of Physics: Conference Series, 234, 22031, 2010.
M. Bagnasco, D. Bessette, L. Bottura, C. Marinucci, C. Rosso, "Progress in the integrated simulation of thermal-hydraulic operation of the ITER magnet system", IEEE Trans. Appl. Sup., 20(3), 411-414, 5444931, 2010.
C. Marinucci, M. Calvi, L. Bottura,F. Cau, A. Portone, "Analysis of the EDIPO temperature margin during current ramp-up", EEE Trans. Appl. Sup., 20(3), 604-607, 5433258, 2010.
L. Muzzi, G. De Marzi, C. Fiamozzi Zignani, L. Affinito, M. Napolitano, R. Viola, C.O. Dominguez, L. Bottura, S. Le Naour, D. Richter, A. Della Corte, "Pinning properties of commercial Nb-Ti wires described by a 2-components model", IEEE Trans. Appl. Sup., 20(3), 1496-1499, 5409520, 2010.
G. Ambrosio, N. Andreev, M. Anerella, E. Barzi, B. Bingham, D. Bocian, B. Bordini, R. Bossert, L. Bottura, et al., "Final development and test preparation of the first 3.7 m long Nb3Sn quadrupole by LARP", IEEE Trans. Appl. Sup., 20(3), 283-287, 5439730, 2010.

2009

P. Arpaia, L. Bottura, V. Inglese, G. Spiezia, "On-field Validation of the New Platform for Magnetic Measurements at CERN", Measurement, 42(1), 97-106, 2009.
N. Sammut, L. Bottura, G. Deferne, W. Venturini-Delsolaro, "Mathematical Formulation to predict the Harmonics of the Superconducting Large Hadron Collider Magnets. III. Pre-Cycle Ramp Rate Effects and Magnet Characterisation", Phys. Rev. Special Topics, Accelerators and Beams, 12, 102401, 2009.
M. Breschi, L. Trevisani, L. Bottura, A. Devred, F. Trillaud, "Comparing the thermal stability of NbTi and Nb 3Sn wires", Superconductor Science and Technology, 22(2),25019, 2009.
D. Bessette, L. Bottura, A. Devred, N. Mitchell, K. Okuno, Y. Nunoya, C. Sborchia, Y. Takahashi, A. Verweij, A. Vostner, R. Zanino, E. Zapretilina, "Test results from the PF conductor insert coil and implications for the ITER PF system", IEEE Trans. Appl. Sup., 19(3), 1525-1531, 4914939, 2009.
M. Breschi, L. Trevisani, L. Bottura, A. Devred, F. Trillaud, "Effects of the Nb3Sn wire cross section configuration on the thermal stability performance", IEEE Trans. Appl. Sup., 19(3), 2432-2436, 4914778, 2009.
L. Bottura, B. Bordini, "Jc(B,T,eps) Parameterization for the ITER Nb 3Sn production", IEEE Trans. Appl. Sup., 19(3), 1521-1524, 5067016, 2009.
L. Bottura, C. Darve, N.A. Patankar, S.W. Van Sciver, "A method for the three-dimensional numerical simulation of superfluid helium", Journal of Physics: Conference Series, 150, 12008, 2009.

2008

L. Bottura, C. Marinucci, "A Porous Medium Analogy for the Helium Flow in CICC's", Int. J. Heat and Mass Transfer, 51, 2494-2505, 2008.
P. Arpaia, L. Bottura, A. Masi, G. Spiezia, "Performance Simulation of a Digital Integrator for Magnetic Measurements at CERN", Measurement, 41(7), 737-743, 2008.
M. DiCastro, L. Bottura, D. Richter, S. Sanfilippo, R. Wolf, "Coupling Current and AC Loss in LHC Superconducting Quadrupoles", IEEE Trans. Appl. Sup., 18 (2), 108-111, 2008.
S. Sanfilippo, N. Sammut, L. Bottura, et al., "Magnetic Performance of the Main Superconducting Magnets for the LHC", IEEE Trans. Appl. Sup., 18 (2), 132-137, 2008.
C. Marinucci, M. Calvi, L. Bottura, P. Bruzzone, R. Herzog, "Quench Analysis of the European High Field Superconducting Dipole Magnet EDIPO", IEEE Trans. Appl. Sup., 18 (2), 200-203, 2008.
P.P. Granieri, M. Calvi, P. Xydi, B. Baudouy, D. Bocian, L. Bottura, M. Breschi, A. Siemko, "Stability Analysis of the LHC Cables for Transient Heat Depositions", IEEE Trans. Appl. Sup., 18 (2), 1257-1262, 2008.
M. Breschi, L. Trevisani, L. Bottura, A. Devred, P. Ribani, F. Trillaud, "Stability of Nb3Sn Superconducting Wires: The Role of the Normal Matrix", IEEE Trans. Appl. Sup., 18 (2), 1305-1308, 2008.
N.R. Brooks, L. Bottura, J.G. Perez, O. Dunkel, L. Walckiers, "Estimation of Mechanical Vibrations of the LHC Fast Magnetic Measurement System", IEEE Trans. Appl. Sup., 18 (2), 1617-1620, 2008.
M. Bagnasco, L. Bottura, P. Bruzzone, M. Lewandowska, C. Marinucci, F. Staehli, "Pressure Drop of Cable-in-Conduit Conductors with Different Void Fraction", Adv. Cryo. Eng., 53, 1317-1324, AIP Conf. Proc. 985(1317), 2008.
P. Arpaia, M.L. Bernardi, L. Bottura, M. Buzio, L. Deniau, G. Di Lucca, V. Inglese, J.G. Perez, G. Spiezia, L. Walckiers, "Kernel design of a flexible software framework for magnetic measurements at CERN", Conference Record - IEEE Inst. Meas. Tech. Conf., 607-611, 4547109, 2008.

2007

L. Bottura, P. Bruzzone, M. Calvi, R. Herzog, C. Marinucci, "Simulation of the Flow-Reversal Effect in Dual-Channel CICC for ITER", Cryogenics, 47(11-12), 553-562, 2007.
C. Marinucci, L. Bottura, P. Bruzzone, B. Stepanov, "Analysis of the Transverse Heat Transfer Coefficient in a Dual-Channel ITER-Type Cable-in-Conduit Conductor", Cryogenics, 47(11-12), 563-576, 2007.
N. Sammut, L. Bottura, J. Micallef, "Mathematical Formulation to predict the Harmonics of the Superconducting Large Hadron Collider Magnets. II. Dynamic Field Changes and Scaling Laws", Phys. Rev. Special Topics, Accelerators and Beams, 10, 082802, 2007.
L. Bottura, P. Bruzzone, J.B. Lister, C. Marinucci, A. Portone, "Computations of AC Loss in the ITER Magnets During Fast Field Transients", IEEE Trans. Appl. Sup., 17 (2), 2438-2441, 2007.
M. Breschi, L. Trevisani, M. Boselli, L. Bottura, P. Ribani, F. Trillaud, "Minimum Quench Energy and Early Quench Development in NbTi Superconducting Strands", IEEE Trans. Appl. Sup., 17 (2), 2702-2705, 2007.

2006

L. Bottura, M. Calvi, A. Siemko, "Stability Analyisis of the LHC Cables", Cryogenics, 46(7-8), 481-493, 2006.
A. Portone, E. Salpietro, L. Bottura, et al., "Design and Optimization of the 12.5 T EFDA Dipole Magnet", Cryogenics, 46(7-8), 494-506, 2006.
L. Bottura, R. Heller, "Criteria for the Numerical Convergence of Quench Simulations in CICC's", Cryogenics, 46(7-8), 556-562, 2006.
L. Bottura, P. Bruzzone, C. Marinucci, B. Stepanov, "Analysis of Transverse Heat Transfer Coefficient in CICC's with Central Cooling Channel", Cryogenics, 46(7-8), 597-605, 2006.
M. Breschi, P.P. Granieri, M. Calvi, M. Coccoli, L. Bottura, "Quench Propagation and Stability Analysis of Rutherford Resistive Core Cables", Cryogenics, 46(7-8), 606-614, 2006.
N. Sammut, L. Bottura, J. Micallef, "Mathematical Formulation to predict the Harmonics of the Superconducting Large Hadron Collider Magnets", Phys. Rev. Special Topics, Accelerators and Beams, 9, 012402-1-12, 2006.
M. Calvi, E. Todesco, L. Bottura, S. Sanfilippo, A. Siemko, "Impact of the First Powering Cycles on the LHC Superconducting Dipole Geometry", IEEE Trans. Appl. Sup., 16 (2), 184-187, 2006.
N. Smirnov, L. Bottura, et al., "Focusing Strength Measurements of the Main Quadrupoles for the LHC", IEEE Trans. Appl. Sup., 16 (2), 261-264, 2006.
S. Sanfilippo, J. Beauquis, L. Bottura, et al., "Electrical and Magnetic Performance of the LHC Short Straight Sections", IEEE Trans. Appl. Sup., 16 (2), 265-268, 2006.
P. Hagen, L. Bottura, et al., "Steering the Field Quality in the Production of the Main Quadrupoles of the Large Hadron Collider" IEEE Trans. Appl. Sup., 16 (2), 285-288, 2006.
V.E. Sytnikov, V.S. Vysotsky, A.V. Rychagov, A.V. Taran, G. Moritz, M. Kauschke, E. Fischer, S.A. Egorov, I.Y. Rodin, V.E. Konsunsky, L. Bottura, M.N. Wilson, "Development and Test of a Miniature Novel Cable-in-Conduit Conductor for Use in Fast Ramping Accelerators with Superconducting Magnets" IEEE Trans. Appl. Sup., 16 (2), 1176-1179, 2006.
M. Calvi, L. Bottura, et al., "Analytical Model of Thermoelectrical Behavior in Superconducting Resistive Core Cables", IEEE Trans. Appl. Sup., 16 (2), 1206-1211, 2006.
A. Portone, E. Salpietro, L. Bottura, et al., "Conceptual Design of the 12.5 T Superconducting EFDA Dipole", IEEE Trans. Appl. Sup., 16 (2), 1312-1315, 2006.
M. Buzio, L. Bottura, et al., "Checking the Polarity of Superconducting Multipole LHC Magnets", IEEE Trans. Appl. Sup., 16 (2), 1391-1394, 2006.
M. Buzio, J. Beauquis, L. Bottura, et al., "Warm and Cold Magnetic and Mechanical Alignment Tests of LHC Short Straight Sections", IEEE Trans. Appl. Sup., 16 (2), 1395-1398, 2006.
M. Calvi, L. Angrisani, L. Bottura, A. Masi, A. Siemko, "On the Use olf Wavelet Transform for Quench Precursors Characterization in the LHC Superconducting Dipole Magnets", IEEE Trans. Appl. Sup., 16 (2), 1811-1814, 2006.

2005

S. Sanfilippo, N. Smirnov, P. Schnizer, N. Sammut, P. Pugnat, L. Bottura, et al., "Axis Measurements, Field Quality and Quench Performance of the First LHC Short Straight Sections", IEEE Trans. Appl. Sup., 15 (2), 1098-1101, 2005.
B. Bellesia, L. Bottura, et al., "Trends in Cable Magnetization and Persistent Currents during the Production of the Main Dipoles of the Large Hadron Collider", IEEE Trans. Appl. Sup., 15 (2), 1213-1216, 2005.
G. Ambrosio, P. Bauer, L. Bottura, et al., "A Scaling Law for the Snapback in Superconducting Accelerator Magnets", IEEE Trans. Appl. Sup., 15 (2), 1217-1220, 2005.
T. Satiramatekul, F. Bouillault, A. Devred, L. Bottura, "Analytical and Numerical Modellings of Elliptical Superconducting Filament Magnetization", IEEE Trans. Appl. Sup., 15 (2), 3680-3683, 2005.

2004

A. Siemko, O. Berrig, L. Bottura, et al., "Quench Performance and Field Quality of the LHC Preseries Superconducting Dipoles", IEEE Trans. Appl. Sup., 14 (2), 165-168, 2004.
E. Todesco, B. Bellesia, L. Bottura, et al., "Steering Field Quality in the Main Dipole Magnets of the Large Hadron Collider", IEEE Trans. Appl. Sup., 14 (2), 177-180, 2004.
L. Bottura, et al., "Magnetic Alignment Measurements at Room and Cryogenic Conditions of LHC Cryodipoles and Associated Correctors at CERN", IEEE Trans. Appl. Sup., 14 (2), 227-230, 2004.
N. Smirnov, L. Bottura, et al., "Results of Magnetic Axis Measurements on a Prototype Main Lattice Quadrupole for the LHC", IEEE Trans. Appl. Sup., 14 (2), 243-246, 2004.
C. Marinucci, L. Bottura, et al., "Analysis and Interpretation of the Tcs Measurements of the ITER Toroidal Conductor Insert", IEEE Trans. Appl. Sup., 14 (2), 1523-1526, 2004.
T. Pieloni, S. Sanfilippo, L. Bottura, et al., "Field Decay and Snapback Measurements using a Fast Hall Probe Sensor", IEEE Trans. Appl. Sup., 14 (2), 1822-1825, 2004.
A. Devred, D.E. Baynham, L. Bottura, et al., "High Field Accelerator Magnet R&D in Europe", IEEE Trans. Appl. Sup., 14 (2), 339-344, 2004.
F. Haug, L. Bottura, F. Broggi, S. Junker, "Quench Induced Pressure Rise in the Cooling Pipes of the ATLAS Barrel Toroid Model ", Adv. Cryo. Eng., 49, 711-718, AIP Conf. Proc. 710(711), 2004.
L. Bottura, P. Bruzzone, C. Marinucci, "Analysis of Current Redistribution in a CICC Under Transient Heat Pulses" Adv. Cryo. Eng., 50, 433-440, AIP Conf. Proc. 711(433), 2004.

2003

L. Bottura, M. Breschi, M. Fabbri, "An Analytical Benchmark for the Calculation of Current Distribution in Superconducting Cables", Cryogenics, 43(3-5), 241-248, 2003.
L. Bottura, C. Rosso, "Flower, a Model for the Analysis of Hydraulic Networks and Processes", Cryogenics, 43(3-5), 215-224, 2003.
L. Bottura, M. Breschi, C. Rosso, "Analysis of Electrical Coupling Parameters in Superconducting Cables", Cryogenics, 43(3-5), 233-240, 2003.
L. Bottura, et al., "Performance of the First LHC Pre-series Superconducting Dipoles", IEEE Trans. Appl. Sup., 13 (2), 1235-1238, 2003.
S. Amet, L. Bottura, et al., "Persistent and Coupling Current Effects in the LHC Superconducting Dipoles", IEEE Trans. Appl. Sup., 13 (2), 1239-1242, 2003.
L. Bottura, M. Breschi, M. Fabbri, "Analytical Calculation of Current Distribution in Multistrand Superconducting Cables", IEEE Trans. Appl. Sup., 13 (2), 1710-1713, 2003.

2002

L. Bottura, M. Breschi, M. Fabbri, "Analytical Solution for the Current Distribution in Multistrand Superconducting Cables", J. Appl. Phys., 92(12), 7571-7580, 2002.
W. Venturini Delsolaro, A. Arn, L. Bottura, C. Giloux, R. Mompo, A. Siemko, L. Walckiers, "The Test Facility for the Short Prototypes of the LHC Superconducting Magnets", Proc. 2001 Cryo. Eng. Conf., AIP Conf. Proc. 613 106-113, 2002
M. Haverkamp, B. ten Haken, L. Bottura, H.H.J. ten Kate, "Penetration of an External Field Change with Arbitrary Angle into a Saturated Superconducting Filament", Physica C, 372-376, 3, 1356-1359, 2002.
W. Venturini Delsolaro, L. Bottura, M. Haverkamp, A. Kuijper, "Degaussing and Decay Reduction in the Short Superconducting Dipole Models for the LHC", IEEE Trans. Appl. Sup., 12 (1), 291-294, 2002.
W. Venturini Delsolaro, Z. Ang, L. Bottura, S. Sanfilippo, A. Siemko, D. Tommasini, L. Walckiers, "Field Quality of the Short Superconducting Dipole Models for the LHC", IEEE Trans. Appl. Sup., 12 (1), 295-300 , 2002.
S. Amet, L. Bottura, L. Deniau, L. Walckiers, "The Multipoles Factory: an Element of the LHC Control", IEEE Trans. Appl. Sup., 12 (1), 1417-1421, 2002.
L. Bottura, C. Marinucci, P. Bruzzone, "Application of the Code THEA to the CONDOPT Experiment in SULTAN", IEEE Trans. Appl. Sup., 12 (1), 1528-1531, 2002.
C. Marinucci, L. Bottura, P. Bruzzone, "Transient Stability Analysis of the SeCRETS Experiment in SULTAN", IEEE Trans. Appl. Sup., 12 (1), 1524-1527, 2002.
L. Bottura, F. Chiusano, O. Dunkel, P. Legrand, S. Schloss, P. Schnizer, P. Sievers, N. Smirnov, "A System for Series Magnetic Measurements of the LHC Main Quadrupoles", IEEE Trans. Appl. Sup., 12 (1), 1688-1692, 2002.
L. Bottura, et al., "Performance of LHC Final Prototype and First Pre-series Superconducting Dipole Magnets ", IEEE Trans. Appl. Sup., 12 (1), 211-214, 2002.
M. Haverkamp, L. Bottura, E. Benedico, S. Sanfilippo, B. ten Haken, H.H.J. ten Kate, "Field Decay and Snap-back Measurements Using a Fast Hall Plate Detector", IEEE Trans. Appl. Sup., 12 (1), 86-89, 2002.
L. Bottura, M. Buzio, G. Deferne, P. Schnizer, P. Sievers, N. Smirnov, "Magnetic Measurements of Alignment of Main LHC Dipoles and Associated Correctors", IEEE Trans. Appl. Sup., 12 (1), 1659-1662, 2002.
A. Akhmetov, S. Amet, I. Baalazi, L. Bottura, M. Gateau, P. Pugnat, L. Walckiers, "Loss and Dynamic Magnetic Field Measurements in LHC Dipoles", IEEE Trans. Appl. Sup., 12 (1), 31-34, 2002.
M. Aleksa, S. Amet, Z. Ang, L. Bottura, et al., "Measurement and Analysis of the Field Quality of LHC Prototype and Pre-series Superconducting Dipoles", IEEE Trans. Appl. Sup., 12 (1), 247-250, 2002.
L. Bottura, M. Buzio, P. Schnizer, N. Smirnov, "A Tool for Simulating Rotating Coil Magnetometers", IEEE Trans. Appl. Sup., 12 (1), 1680-1683, 2002.
W. Venturini Delsolaro, A. Arn, L. Bottura, C. Giloux, R. Mompo, A. Siemko, L. Walckiers, "The test facility for the short prototypes of the LHC superconducting magnets", Adv. Cryo. Eng., 47, 106-113, AIP Conf. Proc. 613(106), 2002.

2001

A. Akhmetov, L. Bottura, M. Breschi, "A Continuum Model for Current Distribution in Rutherford Cables", IEEE Trans. Appl. Sup., 11(1), 2138-2141, 2001.
L. Bottura, M. Breschi, M. Schneider, "Measurement of Magnetic Field Pattern in a Short LHC Dipole Model", IEEE Trans. Appl. Sup., 11(1), 1605-1608, 2001.
M. Haverkamp, A. Kuijper., A. den Ouden, B. ten Haken, L. Bottura, H. ten Kate, "Interaction between Current Imbalance and Magnetization in LHC Cables", IEEE Trans. Appl. Sup., 11(1), 1609-1612, 2001.
L. Bottura, M. Ciotti, et al., "Stability in a Long Length NbTi CICC", IEEE Trans. Appl. Sup., 11(1), 1542-1545, 2001.
L. Bottura, et al., "Performance of the LHC Final Design Full Scale Superconducting Dipole Prototypes", IEEE Trans. Appl. Sup., 11(1), 1554-1557, 2001.
L. Bottura, et al., "Performance of the 1-m Model of the 70-mm Bore Twin Aperture Superconducting Quadrupole for the LHC Insertions", IEEE Trans. Appl. Sup., 11(1), 1641-1644, 2001.
L. Bottura, et al., "Performance of the Single and Twin Aperture Models of the 6 kA Superconducting Quadrupole for the LHC Insertions", IEEE Trans. Appl. Sup., 11(1), 1645-1648, 2001.

2000

A. Akhmetov, L. Bottura, M. Breschi, P.L. Ribani, "A Theoretical Investigation on Current Imbalance in Flat Two Layer Superconducting Cables", Cryogenics, 40(8-10), 627-636, 2000.
L. Bottura, C. Rosso, M. Breschi, "A General Model for Thermal, Hydraulic, and Electric Analysis of Superconducting Cables", Cryogenics, 40(8-10), 617-626, 2000.
P. Bellucci, M. Ciotti, P. Gislon, M. Spadoni, L. Bottura, L. Muzzi, S. Turtu', "Comparison Between the Prediction of the Thermohydraulic Code Gandalf and the Results of a Long Length Instrumented CICC Module Experiment", Cryogenics, 40(8-10), 555-559, 2000.
L. Savoldi, L. Bottura, R. Zanino, "Simulation of Thermal-Hydraulic Transients in Two-Channel CICC with Self-Consistent Boundary Conditions", Adv. Cryo. Eng. 45, 697-704, 2000.
M. Haverkamp, L. Bottura, M. Schneider, "Studies of Decay and Snapback Effects on LHC Dipole Magnets", Proc. 4th European Conf. on Appl. Superconductivity, Sitges, Spain, Inst. Phys. Conf. Ser., 167, 1183-1186, 2000.
L. Bottura, M. Breschi, F. Negrini, P.L. Ribani, "Electromagnetic Analysis of Current Distribution in Multistrand Superconducting Cables", Proc. 4th European Conf. on Appl. Superconductivity, Sitges, Spain, Inst. Phys. Conf. Ser., 167, 1191-1194, 2000.
L. Bottura, et al., "A Mole for Warm Magnetic and Optical Measurement in the LHC Dipoles", IEEE Trans. Appl. Sup., 10(1), 1454-1457, 2000.
J. Billan, L. Bottura, et al., "Twin Rotating Coils for Cold Magnetic Measurements of 15 m Long LHC Dipoles", IEEE Trans. Appl. Sup., 10(1), 1422-1426, 2000.
L. Bottura, L. Larsson, S. Schloss. M. Schneider, N. Smirnov, "A Fast Sextupole Probe for Snapback Measurement in the LHC Dipoles", IEEE Trans. Appl. Sup., 10(1), 1435-1438, 2000.
Z. Ang, L. Bottura, S. Russenschuck, A. Siemko, D. Tommasini, L. Walckiers, "Coil Size and Geometric Field Quality in Short Model Dipoles for LHC", IEEE Trans. Appl. Sup., 10(1), 53-65, 2000.
L. Bottura, "A Practical Fit for the Critical Surface pf NbTi", IEEE Trans. Appl. Sup., 10(1), 1054-1057, 2000.
Z. Ang, S. Arshad, M. Baiko, L. Bottura, et al. "Further Development of the Sextupole Dipole Corrector (MSCB) Magnet for the LHC", IEEE Trans. Appl. Sup., 10(1), 158-161, 2000.
K. Artoos, L. Bottura, et al. "Status of the Short Dipole Model Program for the LHC", IEEE Trans. Appl. Sup., 10(1), 49-52, 2000.
K. Artoos, L. Bottura, et al. "Design, manufacturing Status, First results of the LHC Main Dipole Final Prototypes and Steps Towards Series Manufacture", IEEE Trans. Appl. Sup., 10(1), 98-102, 2000.
L. Bottura, C. Marinucci, C. Rosso, "Two-Channel Analysis of QUELL Experimental Results", IEEE Trans. Appl. Sup., 10(1), 1106-1109, 2000.
C. Marinucci, L. Bottura, et al. "Predictive Quench Initiation Analysis of the ITER TF Model Coil", Proc. ICEC-18, ISBN 81-7319-395-9, 173-178, 2000.

1999

L. Bottura, C. Rosso, "Finite Element Simulation of Steady State and Forced Convection in Superfluid Helium", Int. J. Num. Methods Fluids, 30, 1091-1108, 1999.
J. Billan, M. Bona, L. Bottura, et al., "Test Results on the Long Models and Full Scale Prototypes of the Second Generation LHC Arc Dipoles", IEEE Trans. Appl. Sup., 9(2), 1039-1044, 1999.
Z. Ang, I. Bejar, L. Bottura, D. Richter, M. Sheahan, L. Walckiers, "Measurement of AC Loss and Magnetic Field During Ramps in the LHC Model Dipoles", IEEE Trans. Appl. Sup., 9(2), 1039-1044, 1999.
R. Zanino,, L. Savoldi, F. Tessarin, L. Bottura, "Effects of Bundle/Hole Coupling Parameters in the Two-Fluid Thermal-Hydraulic Analysis of Quench Propagation in Two-Channel Cable-in-Conduit Conductors", IEEE Trans. Appl. Sup., 9(2), 608-611, 1999.
L. Bottura, C. Marinucci, "The Hydraulic Solver Flower and its Validation Against the QUELL Experiment in SULTAN", IEEE Trans. Appl. Sup., 9(2), 616-619, 1999.

1998

L. Bottura, "Stability and Protection of CICC's: an Updated Designer's view", Cryogenics, 38(5), 491-502, 1998.
C. Marinucci, L. Bottura, G. Vecsey, R. Zanino, "The QUELL Experiment as a Validation Tool for the Numerical Code GANDALF", Cryogenics, 38(5), 467-478, 1998.
R. Zanino, L. Bottura, L. Savoldi, C. Rosso, "MITHRANDIR+: a Two-Channel Model for Thermal-Hydraulic Analysis of Cable-in-Conduit Superconductors Cooled with Helium I or II", Cryogenics, 38(5), 525-532, 1998.
L. Bottura, A. Shajii, "Numerical Quenchback in Thermofluid Simulations of Superconducting Magnets", Int. J. Num. Methods Eng., 43, 1275-1293, 1998.
L. Bottura, "Modelling Stability in Superconducting Cables", Physica C, 310(1-4) 316-326, 1998.
R. Zanino, L. Bottura, C. Marinucci, "Computer Simulation of Quench Propagation in QUELL", Adv. Cryo. Eng., 43, 181-188, 1998.
L. Bottura, M. Schneider, L. Walckiers, R. Wolf, "Cable Magnetization Effects in the LHC Main Dipole Magnets", Adv. Cryo. Eng., 43, 451-458, 1998.
L. Bottura, et al., "Design, Manufacturing Aspects and Performance of Recent 10 m Long Model Dipole Superconducting Magnets for the LHC Project", Proc. of 15th. Conf. on Magnet Tech., Beijing, 127-131, 1998.
Z. Ang, L. Bottura, D. Tommasini, L. Walckiers, "Magnetic Field Quality of Short Superconducting Dipole Magnets for LHC", Proc. of 15th. Conf. on Magnet Tech., Beijing, 145-148, 1998.

1997

L. Bottura, A. Portone, S. Chiocchio, "Electromagnetic De-coupling in Integral Eddy Currents Analysis", Int. J. Appl. Electromagnetics and Mechanics, 8, 205-218, 1997.
L. Bottura, L. Walckiers, Z. Ang, "Experimental Evidence of Boundary Induced Coupling Currents in LHC Prototypes", IEEE Trans. Appl Sup., 7(2), 801-804, 1997.
L. Bottura, L. Walckiers, R. Wolf, "Field Errors Decay and "Snap-Back" in LHC Model Dipoles", IEEE Trans. Appl Sup., 7(2), 602-605, 1997.
C. Marinucci, L. Bottura, et al., "Performance of a Quench Detection System for ITER", IEEE Trans. Appl Sup., 7(2), 443-446, 1997.
R. Zanino, L. Bottura, C. Marinucci, "A Comparison between 1- and 2-Fluid Simulations of the QUELL Conductor", IEEE Trans. Appl Sup., 7(2), 493-496, 1997.

1996

L. Bottura, "A Numerical Model for the Simulation of Quench in the ITER Magnets", J. Comp. Phys., 125, 26-41, 1996.
L. Bottura, "The Influence of Cable Conduction on Quench Propagation in Force-flow Cooled Conductors", Sup. Sci. Technol., 9, 141-144, 1996.
M.B. Gorbounov, L. Bottura, et al., "Finite Element Code for Quench and Stability Analysis of Superconducting Magnets Cooled by He II", Adv. Cryo. Eng., 41A, 335-342, 1996.
A. Nijhuis, H. ten Kate, P. Bruzzone, L. Bottura, "Parametric Study on Coupling Loss in Subsize ITER Nb3Sn cabled Specimen", IEEE Trans. Mag., 32 (4), 2743-2747, 1996.
A. Martinez, D. Ciazynski, J.L. Duchateau, L. Bottura, "Stability Experiments on a Long Length of Cable-in-Conduit Conductor Submitted to a Rapidly Changing Magnetic Field", IEEE Trans. Mag., 32 (4), 2846-2849, 1996.
D. Ciazynski, B. Bertrand, P. Decool, A. Martinez, L. Bottura, "Results of the European Study on Conductor Joints for ITER Coils", IEEE Trans. Mag., 32 (4), 2332-2335, 1996.

1995

L. Bottura, "Numerical Aspects in the Simulation of Thermohydraulic Transients in CICC's", J. Fus. Energy, 14 (1), 13-24, 1995.
R. Zanino, S. De Palo, L. Bottura, "A Two-Fluid Code for the Thermohydraulic Transient Analysis of CICC Superconductin g Magnets ", J. Fus. Energy, 14 (1), 25-40, 1995.
S. De Palo, L. Bottura, R. Zanino, "Computer Analysis of the Thermohydraulic Measurements on CEA Dummy Cables Performed at CEN-Grenoble", J. Fus. Energy, 14 (1), 49-58, 1995.
C. Marinucci, L. Bottura, S. Pourrahimi, "A First Characterization of the Quench Detection System for ITER", J. Fus. Energy, 14 (1), 75-92, 1995.
E. Balsamo, L. Bottura, et al., "Validation of the 3-D Code Saruman in a Stability and Quench Experiment with the Superconducting Magnet Saffo", J. Fus. Energy, 14 (1), 113-128, 1995.
L. Bottura, A. Shajii, "On the Numerical Studies of Quench in Cable-in-Conduit Conductors", IEEE Trans. Appl. Sup., 5 (2), 495-498, 1995.
L. Bottura, D. Ciazynski, J.L. Duchateau, A. Martinez, "Stability Experiments on Long Lengths of CICC's", IEEE Trans. Appl. Sup., 5 (2), 576-579, 1995.
B. Blau, I. Rohleder, G. Vecsey, L. Bottura, et al., "AC Behaviour of Full Size, Fusion Dedicated Cable-in-Conduit Conductors in SULTAN III under Applied Pulsed Field", IEEE Trans. Appl. Sup., 5 (2), 697-700, 1995.
L. Bottura, "Thermohydraulics of CICC's with Central Cooling Passage", IEEE Trans. Appl. Sup., 5 (2), 745-748, 1995.
O. Cicchelli, L. Bottura, et al., "Alternative Strand Material for the Toroidal Field Coils of the ITER Magnetic System: Assessment of Nb3Al", IEEE Trans. Appl. Sup. 5 (2), 901-904, 1995.
A. Nijhuis, H. ten Kate, P. Bruzzone, L. Bottura, "First Results of a Parametric Study on Coupling Loss in Subsize NET/ITER Nb3Sn Cabled Specimen", IEEE Trans. Appl. Sup., 5 (2), 992-995, 1995.
P. Gislon, S. Chiarelli, M. Spadoni, L. Bottura, et al., "Effect of Diffusion Barrier on the Magnetization Cycles of Nb3Sn Strand for ITER Conductor", IEEE Trans. Appl. Sup., 5 (2), 1917-1920, 1995.

1994

L. Bottura, "Limiting Current and Stabilty of Cable-in-Conduit Conductors", Cryogenics, 34(10), 787-794, 1994.
L. Bottura, "Parametric Study of Design of Cable-in-Conduit Conductors", IEEE Trans Mag., 30, 4, 1982-1985, 1994.
L. Bottura, O.C.Zienkiewicz, "SARUMAN - An Integrated Procedure for the Analysis of Quench in Superconducting Magnets", IEEE Trans Mag., 30, 4, 1978-1981, 1994.
E.P.Balsamo, L. Bottura, et al., "Experimental Analysis and Computer Simulation on Stability Margin and Quench Behaviour in a NbTi Forced-Flow Cooled Winding Pack", IEEE Trans Mag., 30, 4, 2142-2145, 1994.

1993

N.Mitchell, L. Bottura, S.Chiocchio, "Safety Analysis of the Superconducting Magnet System of a Next Generation Tokamak", Fusion Engineering and Design, 22, 193- 216, 1993.
R.Albanese, L. Bottura, et al., "Validation of Numerical Codes for the Analysis of Plasma Discharges", Fusion Engineering and Design, 23, 299-322, 1993.
R.Toschi, F.Engelmann, E.Salpietro, C.Barnes, H.W.Bartels, J.Basecq, K.Borrass, L. Bottura, et al., "NET Predesign Report", Fusion Engineering and Design, 21, 1993.
L. Bottura, J.V.Minervini,"Calculation of Magnetization, Hysteresis and Power Dissipation in a Superconductor During Bipolar Field Cycles", IEEE Trans. Appl. Sup., 3, 1, 460-463, 1993.
L. Bottura,"Quench Propagation Through Manifolds in Forced Flow Cooled Coils", IEEE Trans. Appl. Sup., 3, 1, 606-609, 1993.
E.P. Balsamo, L. Bottura, et al., "A Stability and Quench Experiment Using a NbTi Forced Flow Cooled Conductor in a Two-dimensional Winding Pack", IEEE Trans. Appl. Sup., 3, 1, 527-530, 1993.

1992

R. Albanese, L. Bottura, E.Coccorese, R. Martone, G.Rubinacci, "Electromagnetic Effects Induced by Plasma Disruption in the NET Vacuum Vessel", Fusion Engineering and Design, 15, 201-221, 1992.
N. Mitchell, L. Bottura, "Superconductors for the NET Coils", Fusion Engineering and Design, 15, 85-100, 1992.
K. Miya, L. Boccaccini, L. Bottura, Y.R. Crutzen, T. Takagi., "Electromagnetic Effects on First Wall and Structural Components", Fusion Engineering and Design, 16, 217-227, 1992.
L. Bottura, "Stability, Protection and AC Loss of Cable-in-Conduit Conductors. A Designer's Approach", Invited paper at: Third International Toki Conference, Toki (Japan), November 1991, Fusion Engineering and Design, 20, 351-362, 1992.
A. Youtsos, L. Bottura, "Eddy Current Heating Analysis of the ITER TF Coil Cases", Fusion Engineering and Design, 19, 73-92, 1992.
L. Bottura, O.C.Zienkiewicz, "Quench Analysis of Large Superconducting Magnets. Part I: model description", Cryogenics, 32 (7), 659-667, 1992.
L. Bottura, O.C.Zienkiewicz, "Quench Analysis of Large Superconducting Magnets. Part II: model validation and application", Cryogenics, 32 (8), 719-728, 1992.
P. Bruzzone, L. Bottura, J. Eikelboom, G.B. Mulder, "AC Losses for the Prototype Cable-in-Conduit Conductors for NET", IEEE Trans. Mag., 28, 1, 194-197, 1992.
L. Bottura, U. Mszanowski, N. Mitchell, " Analysis of the ITER Superconducting Coils: Magnetic Field, AC Losses and Cooling", IEEE Trans. Mag., 28, 1, 230-233, 1992.
L. Bottura, S. Chiocchio, A. Astapkovich, S. Nishio, D. Williamson, "Eddy Currents Benchmark Analysis in ITER", IEEE Trans. Mag., 28, 2, 1505-1508, 1992.

1991

L. Bottura, N. Mitchell, J.V. Minervini, "Design Criteria for Stability in Cable-in-Conduit Conductors", Paper presented at Symposium on Superconductor Stability, Yokohama, 13-15 November, 1990, Cryogenics, 31, 510-515, 1991.
L. Bottura, "2-D Simulation of Quench Propagation for Force-Flow Conductors", IEEE Trans. Mag., 27, 2, 1904-1907, 1991.
L. Bottura, J.V. Minervini, "Modelling of Dual Stability in a Cable-in-Conduit Conductor", IEEE Trans. Mag., 27, 2, 1900-1903, 1991.
N. Mitchell, L. Bottura, P. Bruzzone, F. Fardi, J.V. Minervini, M. Perrella, R. Poehclhen, "Nb3Sn Conductor Development Programme for Superconducting Coils for the European Fusion Programme", IEEE Trans. Mag., 27, 2, 2064-2067, 1991.

1990

L. Bottura, O.C. Zienkiewicz, "Experiments on Iterative Solution for the Semi-Implicit Characteristic-Galerkin Algorithm", Comm. in Appl. Num. Meth., 6, 387-393, 1990.
L. Bottura, J.V. Minervini, "Numerical Analysis of Heating Induced Transient Flow in Supercritical Helium", Adv. Cryo. Eng., 35, 395-402, 1990.

1989

L. Bottura, J.V. Minervini, "Detailed Distribution of AC Loss in the NET TF Coils", IEEE Trans. Mag., 25, 1730-1733, 1989.

1988

J.V. Minervini, L. Bottura, "Stability Analysis of NET TF and PF Conductors", IEEE Trans. Mag., 24, 1311-1314, 1988.
L. Bottura, "Transient Thermal Analysis of Force-Cooled Conductors", Proceedings of 12th Int. Cryo. Eng. Conf., 182-186, Southampton, 12-15 July, 1988, Butterworth.

Non-refereed conference proceedings, notes

L. Bottura, "Cable stability", CAS-CERN Accelerator School: Superconductivity for Accelerators - Proceedings, 401-451, 2014.
D. Tommasini, L.Bottura, G.de Rijk, L. Rossi, "Accelerator Magnet R&D Programme at CERN", Proc. of 2012 Int. Part. Acc. Conf., New Orleans, 3512-3514, 2012.
E. Todesco, N. Aquilina, B. Auchmann, L. Bottura, et al., "The Magnetic Model of the LHC in the Early Phase of Beam Commissioning", Proc. of 2010 Int. Part. Acc. Conf., Kyoto, 55-57, 2010.
Pasquale Arpaia, Luca Bottura, et al., "Measurement and Scaling Laws of the Sextupole Component in the LHC Dipole Magnets", Proc. of 2010 Int. Part. Acc. Conf., Kyoto, 316-318, 2010.
L.Bottura, et al., "First Field Test of FiDeL the Magnetic Field Description for the LHC", Proc. of 2009 Part. Acc. Conf., Vancouver, 241-243, 2010.
L. Bottura, M. Karppinen, G. Kirby, C. Maglioni, V. parma, G. de Rijk, D. Richter, L. Rossi, W. Scandale, L. Serio, D. Tommasini, "Conceptual Design of Superferric Magnets for PS2", Proc. of 2008 European Part. Acc. Conf., Genova, 2410-2412, 2008.
N. Sammut, L. Bottura, G. Deferne, W. Venturini-Delsolaro, R. Wolf, "Dependence of the Static and Dynamic Field Quality of the LHC Superconducting Dipole Magnets on the Pre-Cycle Ramp Rate", Proc. of 2008 European Part. Acc. Conf., Genova, 2479-2481, 2008.
N. Sammut, P. Xydi, R. Alemany Fernandez, L. Bottura, G. Deferne, M. Lamont, J. Miles, S. Sanfilippo, M. Strzelczyk, W. Venturini-Delsolaro, "A Demonstration Experiment for the Forecast of Magnetic Field and Field Errors in the Large Hadron Collider", Proc. of 2008 European Part. Acc. Conf., Genova, 2482-2484, 2008.
P. Xydi, N. Sammut, R. Alemany Fernandez, L. Bottura, G. Deferne, M. Lamont, J. Miles, R. Mompo, M. Strzelczyk, W. Venturini-Delsolaro, "Main Field Tracking Measurements in the LHC Superconducting Dipole and Quadrupole Magnets", Proc. of 2008 European Part. Acc. Conf., Genova, 2485-2487, 2008.
P. Bestmann, L. Bottura, et al., "Magnet Acceptance and Allocation at the LHC Magnet Evaluation Board", Proc. of 2007 Part. Acc. Conf., Albuquerque, 3739-3741, 2007.
M. DiCastro, D. Sernelius, L. Bottura, L. Deniau, N. Sammut, S. Sanfilippo, W. Venturini-Delsolaro, "Parametric Field Modeling for the LHC Main Magnets in Operating Conditions", Proc. of 2007 Part. Acc. Conf., Albuquerque, 1586-1588, 2007.
W. Venturini Delsolaro, L. Bottura, et al., "Measurement and Modeling of Magnetic Hysteresis in the LHC Superconducting Correctors", Proc. of 2006 European Part. Acc. Conf., Edinburgh, 2026-2028, 2006.
G. de Rijk, M. Bajko, L. Bottura, et al., "Performance of the LHC Main Dipoles for Beam Operation", Proc. of 2006 European Part. Acc. Conf., Edinburgh, 2610-2612, 2006.
N. Sammut, L. Bottura, S. Sanfilippo, "The Field Description Model for the LHC Quadrupole Superconducting Magnets", Proc. of 2006 European Part. Acc. Conf., Edinburgh, 2619-2621, 2006.
N. Sammut, L. Bottura, et al., "The Dependence of the Field Decay on the Powering History of the LHC Superconducting Dipole Magnets", Proc. of 2006 European Part. Acc. Conf., Edinburgh, 2622-2624, 2006.
L. Bottura, M. Buzio, P. Galbraith, F. Thierry, A. Tikhov, "Design and Implementation of an Automated Polarity Checker for Superconducting Magnets", Proc. of 2006 IEEE Instrumentation and Measurement Technology Conference, 55-60, 2006.
N. Sammut, E. Benedico-Mora, L. Bottura, et al., "A Hall Plate Based Instrument to Measure the Snapback in the Large Hadron Collider Superconducting Dipole Magnets", Proc. of 2006 IEEE Instrumentation and Measurement Technology Conference, 61-66, 2006.
P. Arpaia, L. Bottura, P. Cimmino, D. Giloteaux, A. Masi, J.G. Perez, G. Spiezia, L. Walckiers, "A Fast Digital Integrator for Magnetic Field Measurements at Cern", Proc. of 2006 IEEE Instrumentation and Measurement Technology Conference, 67-71, 2006.
M. Calvi, L. Angrisani, L. Bottura, M. DiCastro, A. Masi, A. Siemko, "Data Analysis of Transient Energy Releases in the LHC Superconducting Dipole Magnets", Proc. of 2006 IEEE Instrumentation and Measurement Technology Conference, 753-758, 2006.
L. Bottura, M. Buzio, S. Pauletta, N. Smirnov, "Measurement of magnetic axis in accelerator magnets: critical comparison of methods and instruments", Proc. of 2006 IEEE Instrumentation and Measurement Technology Conference, 765-770, 2006.
P. Arpaia, L. Bottura, P. Cimmino, D. Giloteaux, A. Masi, J.G. Perez, G. Spiezia, L. Walckiers, "A Fast Digital Integrator for Magnetic Field Measurements at Cern", Proc. of 2006 IEEE Instrumentation and Measurement Technology Conference, 67-71, 2006.
L. Bottura, V. Granata, S. Fartoukh, E. Todesco, "A Strategy for Sampling the Field Quality of the LHC Dipoles", Proc. of 2004 European Part. Acc. Conf., Lucerne, 1606-1608, 2004.
L. Bottura, T. Pieloni, S. Sanfilippo, G. Ambrosio, P. Bauer, M. Haverkamp, "A Scaling Law for Predicting Snap-back in Superconducting Accelerator Magnets", Proc. of 2004 European Part. Acc. Conf., Lucerne, 1609-1611, 2004.
V. Granata, J. Billan, F. Bordry, L. Bottura, et al., "Magnetic Field Tracking Experiments for LHC", Proc. of 2004 European Part. Acc. Conf., Lucerne, 1621-1623, 2004.
G. Annala, P. Bauer, L. Bottura, M.A. Martens, N. Sammut, G. Velev, V. Shilstev, "Advances in Understanding and Operations of Superconducting Colliders", Proc. of 2005 Part. Acc. Conf., Knoxville, 54-58, 2004.
N. Sammut, L. Bottura, J. Micallef, "The LHC Magnetic Field Model", Proc. of 2005 Part. Acc. Conf., Knoxville, 2648-2650, 2004.
N. Sammut, L. Bottura, J. Micallef, "The LHC Magnetic Field Model", Proc. of 2005 Part. Acc. Conf., Knoxville, 2648-2650, 2004.
W. Zamboni, L. Bottura, F. Villone, "Electromagnetic Analysis of Resistive Transition in Superconducting Cables", Proc. of 2004 Progress in Electromagnetic Research Symposium, 675-678, 2004.
L. Bottura, et al., "Controlling Field Quality in Magnet Production", Proc. of 2003 Part. Acc. Conf., Portland, 173-175, 2003.
P. Bauer, G. Annala, J. DiMarco, R. Hanft, D. Harding, M. Lamm, M. Martens, P. Schlabach, D. Still, M. Tartaglia, J. Tompkins, G. Velev, M. Xiao, L. Bottura, F. Zimmermann, "Analysis of the b2 Correction in Tevatron", Proc. of 2003 Part. Acc. Conf., Portland, 1730-1732, 2003.
R. Saban, E. Blanco-Vinuela, F. Bordry, L. Bottura, et al., "The LHC Test String 2: Results from Run 2", Proc. of 2003 Part. Acc. Conf., Portland, 1945-1947, 2003.
L. Bottura, et al., "Warm-Cold Magnetic Field Correlation in the LHC Main Diples", CERN Internal Report, LHC Project Note 326, October 2003.
L. Bottura, K. Henrichsen, "Field Measurements", LHC Divisional Report, CERN-LHC-2002-020-MTA, 2002.
E. Todesco, L. Bottura, et al., "Status Report on Field Quality in the Main LHC Dipoles", Proc. of 2002 European Part. Acc. Conf., Paris, 2439-2441, 2002.
E. Todesco, L. Bottura, et al., "Optimization of the Even Normal Multipole Components in the Main Dipole of the Large Hadron Collider", Proc. of 2002 European Part. Acc. Conf., Paris, 2427-2429, 2002.
R. Saban, A. Ballarino, E. Blanco-Vinuela, F. Bordry, L. Bottura, et al., "First Results and Status of the LHC Test String 2", Proc. of 2002 European Part. Acc. Conf., Paris, 2424-2426, 2002.
L. Bottura, et al., "Field Quality of the LHC Dipole Magnets in Operating Conditions", Proc. of 2002 European Part. Acc. Conf., Paris, 260-262, 2002.
M. Modena, M. Bajko, L. Bottura, et al., "Final Prototypes, First Pre-series Units and Steps Towards Series Production of LHC Main Dipoles", Proc. of 2001 Part. Acc. Conf., Chicago, 186-188, 2001.
T. Wijnands, M. Lamont, A. Burns, L. Bottura, L. Vos, "Requirements for Real Time Correction of Decay and Snap-back in the LHC Superconducting Magnets", Proc. of 2000 European Part. Acc. Conf., Vienna, 367-369, 2000.
J. Lucas, L. Bottura, et al. "Performance of the 1-m Model of the 6 kA Superconducting Quadrupole for the LHC Insertions", Proc. of 2000 European Part. Acc. Conf., Vienna, 2145-2147, 2000.
M. Modena, K. Artoos, M. Bajko, L. Bottura, et al. "Manufacture and Performance of the LHC Main Dipole Final Prototypes", Proc. of 2000 European Part. Acc. Conf., Vienna, 2148-2150, 2000.
T. Tortschanoff, J. Billan, L. Bottura, et al. "Performance of Series-design Prototype Main Quadrupoles for the LHC", Proc. of 2000 European Part. Acc. Conf., Vienna, 2172-2174, 2000.
L. Walckiers, L. Bottura, et al. "Sensitivity and Accuracy of the Systems for the Magnetic Measurements of the LHC Magnets at CERN", Proc. of 2000 European Part. Acc. Conf., Vienna, 2181-2183, 2000.
L. Bottura, P. Ferracin, S. Russenschuck, D. Tommasini, "Structural Behaviour and Magnetic Field Errors in a Short Model Dipole Magnet for the LHC", CERN 99-01, 170-180, 1999.
N. Andreev, K. Artoos, L. Bottura, et al., "Performance of Five and Six Block Coil Geometries in Short Superconducting Dipole Models for the LHC", Proc. of 1999 Part. Acc. Conf., New York, 154-156, 1999.
J. Wei, D. McChesney, A. Jain, S. Peggs, F. Pilat, L. Bottura, et al., "US-LHC Magnet Database and Conventions", Proc. of 1999 Part. Acc. Conf., New York, 3179-3181, 1999.
L. Bottura, P. Burla, R. Wolf, "LHC Main Dipoles Proposed Baseline Current Ramping", LHC Project Report 172, 1998.
L. Bottura, G.A. Kirby, J. Lucas, R. Ostojic, S. Russenchuck, A. Siemko, T.M. Taylor, I. Vanenkov, W. Weterings, H. Boschman, R.L. Dubbeldam, "Testing of the Large Bore Single Aperture 1-metre Superconducting Dipoles Made with Phenolic Inserts", Proc. of 1998 European Part. Acc. Conf., Stockholm, 2008-2010, 1998.
Z. Ang, L. Bottura, A. Ijspeert, M. Karppinen, L. Walckiers, "Magnetic Performance of First Low-Beta Dipole Corrector Prototype MCBX", Proc. of 1998 European Part. Acc. Conf., Stockholm, 1996-1998, 1998.
L. Bottura, et al., "Performance of the 1-meter Models of the 70 mm Aperture Quadrupole for the LHC Low-Beta Insertions", Proc. of 1998 European Part. Acc. Conf., Stockholm, 2011-2013, 1998.
Z. Ang, A. Arn, L. Bottura, C. Giloux, P. Sievers, N. Smirnov, S. Vincent, L. Walckiers, "Measurements of the LHC Corrector Magnets at Room and Cryogenic Temperatures", Proc. of 1998 European Part. Acc. Conf., Stockholm, 2044-2046, 1998.
J. Billan, M. Bona, L. Bottura, et al., "Manufacturing Features and Performance of Long Models and First Prototype for the LHC Project", Proc. of 1998 European Part. Acc. Conf., Stockholm, 2041-2043, 1998.
L. Bottura, "Field Dynamics in Superconducting Magnets for Particle Accelerators", Proc. of 1997 CERN Accelerator School on Magnetic Measurements and Alignment, CERN 98-05, 79-90, 1998.
R. Bailey, F. Bordry, L. Bottura, et al., "Dynamic Effects and Their Control at the LHC", Proc. of 1997 Part. Acc. Conf., Vancouver, 66-68, 1997.
L. Walckiers, Z. Ang, J. Billan, L. Bottura, et al., "Towards Series Measurements of the LHC Superconducting Dipole Magnets", Proc. of 1997 Part. Acc. Conf., Vancouver, 3377-3379, 1997.
L. Madaro, A. Rijllart, R. Saban, L. Walckiers, L. Bottura, P. Legrand, "A VME-based LabView System for the Magnetic Measurement of the LHC Prototype Dipoles", Proc. of 1996 European Part. Acc. Conf., Sitges, 2246-2248, 1996.
N. Andreev, K. Artoos, L. Bottura, et al., "The 1-m Long Single Aperture Dipole Coil Test Program for LHC", Proc. of 1996 European Part. Acc. Conf., Sitges, 2258-2260, 1996.
L. Bottura, A. Faus-Golfe, L. Walckiers, R. Wolf, "Field Quality of the Main Dipole Magnets for the LHC accelerator", Proc. of 1996 European Part. Acc. Conf., Sitges, 2228-2230, 1996.
R. Albanese, G. Ambrosino, L. Bottura, et al., "Plasma Engineering and Electromagnetic Aspects in ITER Design", Proc. of 18th Symp. on Fusion Technology, Karlsrhuhe, 22-26 August, 1994.
P. Bruzzone , L. Bottura, et al., "Superconductors for Fusion Magnets Tested under Pulsed Field in SULTAN", Proc. of 18th Symp. on Fusion Technology, Karlsrhuhe, 22-26 August, 1994.
P. Bruzzone , L. Bottura, E. Salpietro, "Soldered Scarf Joints for Cabled Superconductors", Proc. of 18th Symp. on Fusion Technology, Karlsrhuhe, 22-26 August, 1994.
L. Bottura, S. Chiocchio, "A Zoom Procedure for Integral Electromagnetic Analysis", Proc. of 3rd Workshop on Electromagnetic Forces and Related Effects on Blankets and Other Structures Surrounding the Plasma Torus, Capri, 29-31 August, 1994.
L. Bottura, "Quench Analysis of Superconducting Magnets. A Numerical Study", EC-Report No. 102, EUR/FU-XII/185/93, 1993.
R.Albanese, L. Bottura, et al., "Electromagnetic Analysis of First Wall and Blanket in NET and ITER-CDA", Proc. of 2nd Workshop on Electromagnetic Forces and Related Effects on Blankets and Other Structures Surrounding the Plasma Torus, Tokai, 15-18 September, 1993, Univ. of Tokyo Report UTNL-R-0302, 57-68, 1993.
L. Bottura, et al., "Eddy Current Codes Validation Against Electromagnetic Transients in ASDEX- Upgrade", Proc. of 17th Symp. on Fusion Technology, Rome, 14-18 September, 1992.
L. Bottura, et al., "Stability Experiment on Long Lengths of Cable-in-conduit Superconductors", Proc. of 17th Symp. on Fusion Technology, Rome, 14-18 September, 1992.
N.Mitchell, L. Bottura, S.Chiocchio, "Safety Analysis of the Magnet System for NET and ITER", Proc. of 17th Symp. on Fusion Technology, Rome, 14-18 September, 1992.
R.Albanese, L. Bottura, et al., "Validation of Numerical Codes for the Analysis of Plasma Discharges in a Fusion Device", Proc. of 17th Symp. on Fusion Technology, Rome, 14-18 September, 1992.
N.Mitchell, J.Basecq, L. Bottura, A.Portone, "Derivation of Parameters Sets for Next Step Tokamaks", Proc. of 17th Symp. on Fusion Technology, Rome, 14-18 September, 1992.
S.Chiocchio, L. Bottura, L.V.Boccaccini, O.Gruber, "An Analysis of Disruption Events in ASDEX-Upgrade Through 3-D Eddy Current Simulation", Proc. of 17th Symp. on Fusion Technology, Rome, 14-18 September, 1992.
R.Albanese, L. Bottura, et al., "Experimental Validation of Numerical Procedures for Tokamaks Devices", Proc. of 1st Workshop on Electromagnetic Forces and Related Effects on Blankets and Other Structures Surrounding the Plasma Torus, Karlsruhe, 20-21 October, 1992, EC Report EUR 14820 EN.
J. Dogget, E. Salpietro, G. Shatalov, M. Akiba, A. Antipenkov, A. Astapkovich, L. Bottura, et al., "ITER Tokamak Device", ITER Documentation Series, 25, IAEA, Vienna, 1991.
L. Bottura, et al., "ITER Magnet", ITER Documentation Series, 26, IAEA, Vienna, 1991.
Y. Shimomura, J. Wesley, A. Astapkovich, L. Bottura, et al., "ITER Poloidal Field System", ITER Documentation Series, 27, IAEA, Vienna, 1991.
L. Bottura, A. Fleischer, "Vacuum Vessel Eddy Current Analysis during a Disruption", Proceedings of 16th Symp. on Fusion Technology, London, 3-7 September, 1990.
L. Bottura, F. Fardi, N. Mitchell, M. Perrella, "Toroidal and Poloidal Coil Concept Design for NET", Proceedings of 16th Symp. on Fusion Technology, London, 3-7 September, 1990.
R. Annandale, L. Bottura, N. Mitchell, M. Perrella, E.Salpietro, "Model Coil Design for Verification of the Coil Conductor Concept for the NET Coils", Proc. of 16th Symp. on Fusion Technology, London, 3-7 September, 1990.
L. Bottura, et al., "ITER: Transient Electromagnetics", Paper presented at 13th IAEA Int. Conf. on Plasma Physics and Controlled Nuclear Fusion Research, IAEA-CN-53/F-3-10, 1990.
J.R. Miller, L. Bottura, et al., "ITER Superconducting Magnet System", Paper presented at 13th IAEA Int. Conf. on Plasma Physics and Controlled Nuclear Fusion Research, IAEA-CN-53/F-3-7, 1990.
L. Bottura, J.V. Minervini, "Transient Thermal Analysis of the NET TF Coils", Proceedings of 15th Symp. on Fusion Technology, 1584-1588, Utrecht, 19-23 September, 1988.
L. Bottura, et al. "3-D Eddy Currents Effects in the NET Vacuum Vessel", Proceedings of 15th Symp. on Fusion Technology, 1546-1551, Utrecht, 19-23 September, 1988.
R. Poehlchen, L. Bottura, et al., "Design Status of the NET Toroidal Coils", Proceedings of 15th Symp. on Fusion Technology, 1576-1583, Utrecht, 19-23 September, 1988.
J.V. Minervini, L. Bottura, " Stability Analysis of NET TF and PF Conductors", EC-Report, EUR/FU-XII/80/87/77, 1987.

Back to the home page of Luca Bottura

Last updated March 2018